Circle - XMOS sliceKIT Hardware Manual

sliceKIT hardware manual

4.4.4 CIRCLE

PIN
1
2
3
4
5
6
7
8
9
10
11
MECHANICAL KEY
12
13
14
15
16
17
18
Copyright © 2013, All Rights Reserved.
Xmos Ltd. is the owner or licensee of this design, code, or Information (collectively, the "Information") and
is providing it to you "AS IS" with no warranty of any kind, express or implied and shall have no liability in
relation to its use. Xmos Ltd. makes no representation that the Information, or any particular implementation
thereof, is or will be free from any claims of infringement and again, shall have no liability in relation to any
such claims.
XMOS and the XMOS logo are registered trademarks of Xmos Ltd. in the United Kingdom and other countries,
and may not be used without written permission. All other trademarks are property of their respective owners.
Where those designations appear in this book, and XMOS was aware of a trademark claim, the designations
have been printed with initial capital letters or in all capitals.
REV A
SIDE B (top) SIDE A (bottom)
NC NC
X1D0 5V
GND X1D12
X1D11 X1D23
3V3 GND
X1D26 X1D32
X1D27 X1D33
GND X1D25
X1D28 X1D30
X1D34 GND
X1D29 X1D31
X1D36 NC
X1D37 NC
CLK GND
X1D24 X1D35
GND RST_N
X1D38 NC
X1D39 NC
31/31