Table of Contents
Advertisement
1 Overview
IN TH I S C H A P T ER
Introduction
sliceKIT system layout
1.1 Introduction
This document covers the hardware design of the sliceKIT Modular Development
System, consisting of the core board, sliceCARDs and xSYS adaptor.
The core board contains a fully pinned out 16-core xCORE multicore microcon-
troller. All GPIOs are connected to four expansion connectors (termed slots ) which
interface with expansion cards called sliceCARDs that plug into the slots. The core
board also contains all circuitry necessary for operating and debugging the xCORE
system. Multiple sliceKIT core boards can be interconnected to form a multi xCORE
device system with dual 5-bit xCONNECT Links being present between the boards.
REV A
Advertisement
Table of Contents
