Advertisement
Connection
1. Insert the connector securely until a click is
heard.
Pull lock type
(PACKARD-2)
Disconnection
1. Disconnect the connector (2) by pulling lock (B)
(on the wiring harness side) of connector (2)
outward.
Connection
1. Insert the connector securely until a click is
heard.
Push lock type
(BOSCH-3)
Disconnection
1. While pressing lock (C), pull out connector (3) in
the direction of the arrow.
114 series
q
WA200-7
107 series
q
a If the lock is located on the underside, use
flat-head screwdriver [1] since you cannot in-
sert your fingers.
While pushing up lock (C) of the connector
with flat-head screwdriver [1], pull out con-
nector (3) in the direction of the arrow.
Connection
1. Insert the connector securely until a click is
heard.
(AMP-3)
Disconnection
1. While pressing lock (E), pull out connector (5) in
the direction of the arrow.
00 Index and foreword
Handling of electrical equipment
00-37
Advertisement
