Summary of Contents for Discount Car Stereo A2D-AIMV1
Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 Created August 27, 2019 Revised: August 19, 2022...
Page 2
PRODUCT SAFETY & DISCLAIMER READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY • This installation guide is provided as a GENERAL installation guide, some vehicles vary and may require additional steps. We do not accept responsibility for third party labor charges or modifications.
Page 3
Warning: Module male right-angle plug does not have arrow marking. To connect, align imaginary mark shown in Fig. 4 with mark on the CD changer socket (See Fig. 2), Ignoring this warning may damage both plug and connector. Fig. 4 4.
Pairing Operation Turn ignition to accessory position and radio ON. Pairing process varies among devices but basic steps are the same. This 2. Press “CD” button. process is done upon initial install and will not have to be repeated. Turn Ignition and Radio “ON” Green LED inside module peephole will flash (pairing mode)—some clicking may also be heard (this is normal) Settings, Wireless &...
Page 5
Smart remote operation: Optional – Smart remote control Use smart remote to perform the following functions on any iOS7.0 and higher or Android 4.4 and higher. Optional smart remote control is not required for module to operation; however instead of fumbling smartphone to change tracks etc., use remote control functions and keep eyes on the road.
Need help?
Do you have a question about the A2D-AIMV1 and is the answer not in the manual?
Questions and answers