Connecting Your Devices; Viewsonic - ViewSonic PJ359w User Manual

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
VCR/DVD player
NOTE
The COMPUTER IN1 port can support a component signal also.
•
For more information, please see the description of the COMPUTER IN item of
the INPUT menu (29).
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or otherwise designed cables. Ask your dealer
about non-accessory cables which may have to be of a specific length or
equipped with a core. For cables with a core only at one end, connect the end
with the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.

ViewSonic

AUDIO OUT S-VIDEO OUT
L R
RGB OUT
or
COMPUTER IN1
S-VIDEO
K
VIDEO
PC
AUDIO AUDIO
USB-A
RGB OUT
OUT OUT
USB
COMPUTER IN2
DVI OUT
HDMI OUT
8
Speakers
(with an amplifier)
AUDIO
IN
AUDIO OUT
HDMI
AUDIO IN
Monitor
PJ359W