Eiki LC-120 Owner's Instruction Manual page 3

IMPORTANT SAFETY INSTRUCTIONS
'All the safety and operating instructions should be read
before the productis operated.
Read all of the instructions given here and retain them
for later use. Unplug this projector from AC power
supply before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
Da not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
Child of adult, and serious damage to the projector. Use
only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturers instructions,
and should use a mounting kit approved by the
manufacturer.
Do not expose this unit to rain or use near water... lor
example, іп a wet basement, near a swimming pool or
the Wa
Slots and openings in the cabinet and the back or
bottom are provided for ventilation, to insure reliable
'operation of the equipment and to protect it from
overheating
The openings should never be covered with cloth
other material, and the bottom opening should not
blocked by placing the projector on a bad, sofa, rug,
other similar surface. This projector should never
placed near or over a radiator or heat register.
This projector should not be placed in a builtin
Installation such as a bookcase unless proper
ventilation is provided.
ЕЕЗ
'This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type ol power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension cords as this
сап result in fire or electric shock. Do not allow anything
to rest on the power cord. Do not locale this projector
Where the cord will be abused by persons walking on it.
Never push objecis of any kind into this projector
through cabinet slots as they may touch dangerous
'voltage points or short out parts that could result in a fire
ог electric shock. Never spill liquid ol any kind on the
projector.
Do not attempt to service this projector yoursell as
Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
Unplug this projector from wall outlet and refer servicing
to qualified service personnel under the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
e. f the projector has been exposed to rain or water,
d. If the projector does not operate normally by following
the operating instructions, Adjust only those controls
that are covered by tha operating Instructions as
improper adjustment of other controls may result in
damage and wil often require extensive work by а
qualified technician to restore the projector to normal
'operation.
e. If the projector has been dropped or the cabinet has
been damaged.
LWhen the projector exhibits a distinct change in
performance.this indicates a need for servico.
When replacement parts are required, be sure the
service technician has used replacement parts specified
by the manufacturer that have the same characteristics
as the original part. Unauthorized substitutions may
result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform routine
safely checks lo determine that the projector is in sate
'operating condition
Follow all warnings and instructions marked on the
projectors.
For added protection for the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and powerline surges.
An appliance and cart comb-
naton should be moved with
Care, Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn,