Using The Built-In Video - Eiki LC-120 Owner's Instruction Manual

USING THE BUILT-IN VIDEO
This built-in VCP is based on a VHS-PAL signal system.
Only video cassette bearing the [VHS] symbol can be
used.
TO TURN ON THE BUILT-IN VIDEO
Connect the projector's AC power cord into a wall outlet
and press the MAINS switch (located on back of the
projector) to ON(IN) position, the VCP is in the stand-by
condition, The VCP POWER indicator wil ight RED.
Press the POWER (LAMP) ON/OFF button on the
projector (or on the remote control unit) to ON. Then
press the VCP POWER button on the built-in VCP or on
the remote control unit to ON. The VCP POWER and
ОН indicators will Ights RED. The VCP is in the VCP
power on condition.
VCP Stand-by | VCP POWER indicator | s; FAT
Condüon | wil ight RED. хД
VOR Power on | VCP POWER and ON
Condition Indicators will light RED.
AUTO POWER ON
The VCP power is automatically swiched on as a
cassette is inserted while the VCP is in the stand-by
condition.
COLOUR SYSTEM
The builtin VCP can play back three types of tapes.
The tapes recorded in the PAL format, the MESECAM
format (Middle East Secam) and in the NTSC format,
Before beginning the playback ol a tape, be sure to set
the colour system switch on the front of the VCP as
indicated in the table.
Tape Projector. VCP colour
format colour system system
PAL AUTOorPAL | PAL
NTSC AUTOoNTSC | NTSC1
AUTO or PAL NTSC2
MESECAM| AUTO or SECAM | MESECAM
Notes:
(Ша cassette recorded on a SECAM VCR or a SECAM
prerecorded tape is played back on this VCP, the
picture will be black and white. Because this VCP
cannot be used in France, the use of a БЕСАМ
system is suggested.
[When using the AUTO position on a projector, the
playback picture may be black and white or the sound
may not be reproduced. In that case, set projector
colour system to match position, according to the tape
format to play back, indicated in the table.
CASSETTE LOADING AND UNLOADING
LOADING
When a video cassette is inserted, it will be loaded
automatically.
UNLOADING
POWER OFF EJECT
The video cassette will be ejected when the 1/4 STOP/
EJECT button is pressed, even when the VCP is іп
stand-by condition.
CAUTION: Do not put your hand or other objects in
the cassette loading slot because of the
risk of injury or an accident,
Be sure to keep small children away from
the set.
=12—