Table of Contents
Advertisement
Getting Started
Install ActiSync software
1.
Download the ActiSync software from
2.
Double click the file to open and follow prompts to complete installation.
OS Windows 10 or later (ActiSync is not compatible with MacOS)
Charge the LEAP
The LEAP should be fully charged before assignment and deployment. It takes up
to 2-3 hours to fully charge an LEAP. Charging temperature range is 0°C to 40°C.
1.
Connect the charging dock to a wall outlet using the supplied wall plug.
2.
Connect the LEAP to the ActiGraph LEAP™ Charger by placing the LEAP
on top of the charger making sure the charging pins are aligned to the
correct groves on the charger. The LEAP will snap into place magnetically.
3.
The LEAP is fully charged once a solid battery icon appears on the screen.
Please note: An Internet connection is not required to
charge the LEAP(s).
ACTIGRAPH LEAP™ | E.200.6025 | RELEASED: 10/09/2023 | REV: 0
|
Continued
https://actigraphcorp.com/actisync
ActiSync System Requirements
CPU Dual core processor | HDD 20MB, USB 2.0
6
THEACTIGRAPH.COM
Advertisement
Table of Contents
