Advertisement
Document No:
E.200.4038
Change History
Rev
CRF # or
Effective Date
0
2018-08-09
All information contained herein is confidential and proprietary. All design, manufacturing, use, reproduction, & sales rights are expressly
reserved. Communication of this information to others is prohibited.
CentrePoint Insight Watch Technical
Manual
Revision - 0
Description of Change
Initial Release
Page 1 of 10
Advertisement
Table of Contents
Related Manuals for ActiGraph CPW01
Summary of Contents for ActiGraph CPW01
- Page 1 CentrePoint Insight Watch Technical Manual Document No: E.200.4038 Revision - 0 Change History CRF # or Description of Change Effective Date 2018-08-09 Initial Release All information contained herein is confidential and proprietary. All design, manufacturing, use, reproduction, & sales rights are expressly reserved.
- Page 2 ActiGraph understands that patients may be the intended operators of the ActiGraph CPW01 which is why it was designed to be easy to use with no formal training required for use. This Technical Manual will describe all the regulatory symbols, technical specifications, unique functionality, and safety statements are required for regulatory purposes.
- Page 3 CentrePoint Software to be able to use the CPW01 device. 2.2 Battery The ActiGraph CPW01 device uses a lithium polymer rechargeable battery that has a maximum voltage of approximately 4.20 volts and a total life expectancy of two to five (2-5) years. Batteries are to be serviced by ActiGraph authorized personnel only.
- Page 4 ActiGraph’s Customer Service immediately. 2.3 Device Storage and Life Expectancy The CPW01 is recommended to be stored at 20°C to achieve the maximum life expectancy and battery life performance. The minimum/maximum storage temperature range is between -20℃ and 55℃. For optimal battery life performance, routinely charge the device as described above.
-
Page 5: Button Operation
ActiGraph. 3.4 Wear Locations The ActiGraph CPW01 is designed to be worn on the wrist. Other wear locations would have to be selected in the CentrePoint system and ActiGraph should be contacted if other wear locations are desired. -
Page 6: Cleaning The Device
If maintenance is required on a device, or a piece of a device has gone missing, call ActiGraph Customer Support or visit the support section on the ActiGraph website ... -
Page 7: Regulatory And Safety Information
E.200.4038 Revision: 0 ActiGraph and only use them as described since the misuse of accessories and other detachable parts may be harmful to the user. The life expectancy of each accessory is different since each accessory is subject to different elements. - Page 8 Class II double insulated electrical appliance. Earth ground is not required. Insulation breakdown will not result in an electrical shock risk. The CPW01 and Charger complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
-
Page 9: Australia/New Zealand
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ICES-3 The CPW01 and Charger complies with the Canadian electronic emission standard CAN ICES-3 ( B)/NMB-3(B) (B)/NMB-3(B) CAN ICES-1 The CPW01 and Charger complies with the Canadian interference-causing equipment standard CAN ICES-001 (B)/NMB-1(B). -
Page 10: Physiological Effects
The devices are water resistant in accordance with IEC 60529 and have the International IP57 Protection Rating: I P57 o r immersion in one (1) meter of water for up to 30 minutes. Contact ActiGraph Customer Service regarding the disposal of these products. o o...