Table of Contents
Advertisement
Unassignment
7.
A "Data Collection Complete" tag will appear in the general tab under the "Subject Details"
8.
Collect the LEAP, charger, and all accessories. Clean the LEAP with an alcohol-based solution (wipes or swabs) and
store all equipment until the end of the study.
LEAP devices from ActiGraph are approved to be cleaned with a non-abrasive cloth and any alcohol-based solution.
For optimal results, apply isopropyl alcohol to the cloth, clean the device for 15-20 seconds, and let air dry. The
ActiGraph LEAP devices are not to be sterilized because damage may occur. Although the LEAP devices from
ActiGraph are not required to be cleaned on any predetermined schedule, it is advised that the devices be cleaned
after each use by a user.
Cleaning the LEAP multiple times during its expected service life will not cause a loss of basic safety or essential
performance.
Please note: The ActiGraph LEAP™ (LEAP) and accessories should be cleaned with 70% Isopropyl
alcohol between each use. Allow 10 minutes to air dry prior to re-use.
ACTIGRAPH LEAP™ | E.200.6025 | RELEASED: 10/09/2023 | REV: 0
|
Continued
21
THEACTIGRAPH.COM
Advertisement
Table of Contents
