Roof Assembly; Floor Assembly - atd models ATD021 Instruction Manual

5. Detach three Roof Packers . Then fold each
one along the score line and glue together.
7.
Detach the Back Wall & Roof component and
lay it face up on your work surface.
Then, glue the roof curb to the roof.
i
8. Glue the Back Wall to the Inner Wall,
ensuring the bottom of each wall are
aligned.
The Back Wall should sit flush between the
i
two outer side walls.
Do not glue the roof to the walls just yet
as you will need access to the inside to
position the floors.
9. Detach the Ground Floor. Fold it along the
crease line and glue together.
10. Apply a bead of glue around the edge of the
floor and glue it into position.
Ensure you take your time with this step.
Applying even pressure where the floor
meets the wall until it's semi-cured will ensure
a firm hold.
6. Take the three packers from the last step
and glue them on top of one another to form
the roof curb.