Advertisement
Remote control RC-80/RC-80E
M@ Input selector keys
cD
PHONO
TUNER
TAPE
CJ ta Go
VIDEO
These keys have the same functions as the input selector
keys on the receiver.
®@ The VIDEO 3 key corresponds to the AUX input of the
receiver.
@ Equalizer/Surround/System memory keys
SYSTEM
SURROUND
Every time the EQ key is pressed, the equalizer of this unit
can
be switched
ON/DEFEAT
or ten preset equalizer
patterns can be changed over in the following cycle.
—
PGM A
OFF
SETA
The SYSTEM
MEMORY
and SURROUND
keys have the
same functions as the keys with the same name on the
front panel of the receiver.
(Remember that the SURROUND
key is not used with the
Europe model.)
@ Volume level keys
MUTE
REAR
MAIN
LEVEL
VOL.
These keys allow the same operations as the keys with the
same names on the receiver.
(The REAR LEVEL key is not used with the Europe model.)
30 = kRv7010 (En)
@ POWER
keys
[RC-80}
POWER
AUDIO key:
Switches
the power
of the receiver to ON/STAND-BY
(OFF).
TV key:
Switches
the power
of the TV set to ON/STAND-BY
(OFF).
VIDEO key:
POWER
POWER
key:
Switches the power of the receiver to ON/STAND-BY
(OFF).
@ TV/VIDEO control keys (RC-80 only)
POWER
TV VOL keys:
Pressing the [A] key increases the volume of the TV set.
and pressing the [V] key decreases it.
TV CH keys:
Pressing the [A] key shifts the channel tuned on the TV set
upward, and pressing the [V] key shifts it downward.
TV/VIDEO TV key:
Every time this key is pressed, the input to the TV set is
switched between the TV signal and the external video
signal.
TV/VIDEO VIDEO key:
Every time this key is pressed, the output from the video
deck is switched between the TV channel RF output and
video output.
Advertisement
