Download Print this page

Kenwood KR-V7010 Instruction Manual page 10

Audio/video stereo receiver

Advertisement

POWER key
Switches the power ON/OFF.
SPEAKERS A and B switches
Selects the speaker system to be used for listening.
Note:
When the SPEAKERS A and B switches are both used at the same
time, the speakers connected to the SPEAKERS A and B terminals
are connected in series. Therefore, whenever using the SPEAK-
ERS A and B switches at the same time, be sure that two Pairs of
speakers are connected to the A and B terminals, otherwise no
sound is output.
EQ. (Equalizer) PRESET (M-A ~ M-E) keys
Use these keys to store equalizer patterns in memory or to
recall them.
PHONES jack
Equalizer level control keys
Adjust these keys up and down to equalize the sound level
of the indicated frequencies with in a range of +12 dB.
10
kR-v7010
(En)
!
Display section
|
LS et
oe eel
EQ/SPI key
Pressing this key alternates the display mode between EQ
(graphic equalizer) and SPI (spectrum peak indicator).
Equalizer (EQ, ON) key
EQ REC key
Used when recording a source to a tape deck through the
graphic equalizer.

Advertisement

loading