Advertisement
Listening to broadcasts
POWER
key
TUNING keys
Band selector keys
MAIN VOLUME
CONTROL keys
AUTO/MANU.
(MONO) key
KENWOOD
=
=
a
AUDIO-VIDEO
STEREO
RECEIVER
KR-V70I0
ow
coo
oe
FM
A
A
AM.
REAR
MAIN
mana
|
Powe
ING
_ue
Mono) 20
DIRECT
—
mi
SPEAKERS
V
V
<n OOFF
avatar voor:
BNP
Ss
HARA
VOLUME CONTROL
—|
ee
ee
i
——)
i
PHONES:
2
Sk
|{§9./5P1-PEAK HOLD
ES
=
SURROUND ON/OFF.
Gdn
a
© FEECEEEE FR aa
yee
@ To listen to radio broadcasts
. Press the POWER
key to ON.
. Press the TUNER input selector key.
. Press the AM or FM band selector key.
. Tune in the desired broadcasting station according to
the instructions in the "Tuning methods" section be-
low.
WN
M@ Tuning methods
Auto tuning
When the TUNING key is pressed, broadcast frequencies
are scanned
automatically in the upward or downward
direction
until a station
is located
and tuned
in. The
stereo/monaural FM reception mode is set automatically
according to the station.
1. Press
the AUTO/MANU.
(MONO)
key so that the
AUTO indicator lights.
2. Press the UP or DOWN
segment of the TUNING
key.
© Pressing the UP segment scans broadcast frequen-
cies
by varying
the displayed
frequencies
in the
upward direction, and pressing the DOWN
segment
scans
by varying the frequencies in the downward
direction.
® When
a broadcasting
station
is received,
the fre-
quency display freezes and indicates the frequency of
the received station.
3. If the received station is not the desired station. press
the same segment of the TUNING
key again.
© Repeat this until the desired station is received.
16
ka-v7010
(En)
input selector keys
® During tuning, sound is not heard because the muting
circuit is activated. The sound will be heard suddenly
as soon
as a station
is received,so
be careful
in
setting the sound volume level.
5. When the desired station is received, adjust the volume
with the MAIN VOLUME CONTROL keys.
Manual tuning
Stations with weak signal strength cannot be received by
auto tuning. In such cases, tune in the desired station by
manual tuning. The station will be received in monaural
mode (monaural mode is resistant to noise).
1. Press
the AUTO/MANU.
(MONO)
key so that the
AUTO indicator is off.
2. Press the UP or DOWN
segment of the TUNING
key.
@ Every time the TUNING key is pressed, the displayed
frequency varies by one step in the direction indi-
cated by the pressed segment.
® Holding the TUNING
key depressed varies the dis-
played frequency continuously.
3. When the frequency of the desired station is tuned in,
release the TUNING
key.
® Noise may be heard if the tuned frequency
is not
precisely the same as the frequency of the station. In
such cases, press the UP or DOWN
segment of the
TUNING key to adjust the tuning precisely.
Advertisement
