Advertisement
Equalizer preset mode key (PGM/SET)
Each time this key is pressed, the recall mode
of the
equalizer preset patterns alternates between
PGM
(user
programmed patterns) and SET (factory preset patterns).
Equalizer preset MEMORY
key
This key is used to store an equalizer pattern the PGM
PRESET memory.
SPI. LEVEL contro! keys
These control keys are used to adjust the display level of
the spectrum analyzer display.
Input selector keys
Select the input source.
output.
DOLBY surround mode is automatically entered when
this key is pressed.
PEAK HOLD key
REAR VOLUME
control keys (Except for Europe.)
Adjusts front/rear balancing when surround speakers are
used. The control range is +20 dB of the front speaker
level.
MAIN VOLUME
control keys
This contro! adjusts the left- and right-channel volume
levels simultaneously. Set it for the desired listening level.
MUTING key
When the muting key is pressed, the MUTING indicator
in the display window will flash, and the overall listening
sound level is reduced.
When
the key is pressed
again, the listening level is
restored to same level as before.
BALANCE
control keys
Adjust the left and right volume balance.
REMOTE
POWER
STAND-BY indicator
This indicator lights if the power cord is plugged into the
AC outlet. It is lit to show that the POWER switch on the
front panel or the POWER key on the remote control unit
can be activated.
REMOTE SENSOR
Point the supplied
remote
control
unit towards
this
sensor and operate.
KR-V7010 (En)
11
Advertisement
