Download Print this page

Kenwood KR-V7010 Instruction Manual page 15

Audio/video stereo receiver

Advertisement

Operating instructions
KENWOOD |] avoio-vioeo stEREo RECEIVER KR-V7010
cn
SE
a
A
[— |
———a
oo a
so
mata BY
i
Py
pows TUNING
_uP_wwaliono) li-fO _ OIRECT
>>
a
d
V
VOLUME
CONTROL
oa Hag £9.73 PEAK Fo rr
"ux | TUNER
Input selector keys
Equalizer level control keys
BALANCE keys
@ To record an input source
1. Select
the source
to be
recorded
with
the
input
selector keys.
2. Play the source.
3. Set tape deck 1 and/or tape deck 2 to record mode.
i Basic operation
1. Press the POWER key to ON.
® The display lights and the unit becomes operative.
® Pressing the key again switches the power OFF.
2. Press one of the input selector keys to select the input
source to be played.
© If a System Control cord has been connected to the
selected source component,
it starts play automati-
cally due the Automatic Play operation feature.
® With the Automatic Play operation feature, when one
of the source components is started to be played, the
corresponding
input
selector
is
automatically
switched for the source.
@ The selected input source is shown on the display.
3. If automatic play operation using the System Control
cords has not been set, start playing the source com-
ponent selected.
4. Adjust the output level with the MAIN VOLUME CON-
Note:
When a tape deck is connected to this unit with a System Control
cord, all of the input selector keys are disabled during recording
and do not function until recording is finished. This will prevent
the recording from being interrupted:
@ Tape dubbing
Tape recordings may be duplicated (dubbed) easily using
two tape decks connected to the TAPE 1 and 2 jacks.
For example:
(TAPE 1 to 2):
Note:
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
4. Do not press the TAPE
1 key during recording with
tape deck 1.
Note:
Adjust recording levels on the deck that is making the copy using
that deck's operating controls.
POWER
switch stand-by
The standby indicator on the front pane remains lit while
the power plug of the receiver is connected to the AC
outlet.
lf this set is not used for a Jong time. the power cord
should be disconnected from the AC outlet.
KR-V7010(En)
15

Advertisement

loading