Technical Data - Silvercrest SAS 7.4 LI C2 Operating Instructions Manual

NOTE
► This appliance is supplied with non-charged batteries . The batteries must be
charged before first use .

Technical data

Mains adapter 4
Input voltage/current
Output voltage/current
Polarity of the barrel plug
Efficiency class
Protection class
Type designation
Manufacturer
Protection type
Appliance
Input voltage/current
Polarity
Collection volume
Rechargeable batteries
Capacity
Rechargeable battery
Battery charging time
Running time with full charge
SAS 7.4 LI C2
100 - 240 V ∼ (AC), 50/60 Hz, 0 .3 A
9 .6 V (direct current) / 500 mA
(positive terminal inside,
negative terminal outside)
v
5
II / (double insulation)
ZD006C096050EUE
E-TEK Electronics Manufactory Co ., LTD
IP20 - Protected against solid foreign
bodies with a diameter of ≥ 12 .5 mm/
No protection against water
9 .6 V (direct current) / 500 mA
Dust: max . 400 ml
Liquids: max . 150 ml
2000 mAh
7 .4 V (2 x 3 .7 V Lithium-ion rechargeable
batteries)
Approx . 5 hours (with completely
discharged battery)
Approx . 22 minutes
GB │ IE │ 17 ■