Yamaha FJR 2007 Owner's Manual page 27

Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then "AV_ _._
MPG" (average distance that can be
traveled using 1.0 US.gal of fuel) is dis-
played.
NOTE:
G
To reset the average fuel con-
sumption display, push the "RE-
SET" button to select the mode
again, and then push the "RESET"
button for 1 second while the dis-
play is flashing.
INSTRUMENT AND CONTROL FUNCTIONS
G
After resetting the average fuel
consumption display, "_ _._" will
be shown for that display until the
vehicle has traveled 1 km (0.6 mi).
CAUTION:
If there is a malfunction, "– –.–" will
be displayed. Have a Yamaha dealer
check the vehicle.
Self-diagnosis device
1. Error code display
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
multi-function display will indicate a
two-digit error code.
3-9
If the multi-function display indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the vehicle.
ECA15472
CAUTION:
If the multi-function display indi-
cates an error code, the vehicle
should be checked as soon as pos-
sible in order to avoid engine dam-
age.
ECA11790
3