Instrument And Control Functions; Ycc-S System; Main Switch/Steering Lock - Yamaha FJR 2007 Owner's Manual

YCC-S system

This vehicle features the YCC-S
(Yamaha Chip Controlled-Shift) sys-
tem.
The basic function of this system allows
the rider to shift gears without the use of
a clutch lever. Furthermore, a shift lever
is equipped on the handlebar, allowing
the rider to choose to shift gears either
with the shift pedal or by hand.
When the engine is started and the shift
pedal or the shift lever is moved, a sig-
nal is sent to the MCU (Motor Control
Unit) which disengages the clutch, then
the shift is made. The MCU engages
the clutch once the engine is running at
the proper speed. Clutch engagement
is controlled optimally by the MCU ac-
cording to engine r/min, engine require-
ments, and riding conditions. See
"Handlebar switches" (page 3-10) and
OPERATION AND IMPORTANT
RIDING POINTS (page 5-1) for further
explanation of this system.

INSTRUMENT AND CONTROL FUNCTIONS

EAU40472
NOTE:
This is not an automatic transmission,
only the clutch system is automatic.
The gears must be shifted by the rider.

Main switch/steering lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
ON
All electrical circuits are supplied with
power, and the meter lighting, taillights,
license plate light and position lights
come on, and the engine can be start-
ed. The key cannot be removed.
NOTE:
The headlights come on automatically
when the engine is started and stay on
until the key is turned to "OFF", even if
the engine stalls.
3-1
EAU10460
3
EAU35921