Adjusting The Front Fork - Yamaha FJR 2007 Owner's Manual

Adjusting the front fork

This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting knobs and compres-
sion damping force adjusting screws.
WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Spring preload
1. Spring preload adjusting bolt
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
INSTRUMENT AND CONTROL FUNCTIONS
EAU14731 load and thereby
suspension, turn the adjusting bolt on
each fork leg in direction (b).
NOTE:
Align the appropriate groove on the ad-
justing mechanism with the top of the
EWA10180
front fork cap bolt.
1. Current setting
2. Front fork cap bolt
Spring preload setting:
Minimum (soft):
6
Standard:
4
Maximum (hard):
1
soften the Rebound damping force
1. Rebound damping force adjusting knob
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting knob on each
fork leg in direction (a). To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting knob on each fork leg in direc-
tion (b).
3-23
Rebound damping setting:
Minimum (soft):
17 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting knob fully turned
in direction (a)
3