Cleaning The Air Filter Element - Yamaha YZ65P Owner's Manual

Periodic maintenance and adjustment
6. Pour the recommended coolant
into the radiator until it is full.
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol anti-
freeze containing corrosion inhibi-
tors for aluminum engines
Coolant quantity:
Radiator (including all routes):
0.38 L (0.40 US qt, 0.33 Imp.qt)
7. Install the radiator cap, start the
engine, let it idle for several minu-
tes, and then turn it off.
8. Remove the radiator cap to check
the coolant level in the radiator. If
necessary, add sufficient coolant
until it reaches the bottom of the
radiator filler neck, and then install
the radiator cap.
9. Start the engine, and then check
the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.

Cleaning the air filter element

Clean or replace the air filter element at
the intervals specified in the periodic
maintenance and lubrication chart.
Service the air filter element more fre-
quently if you often ride in wet or dusty
conditions.
1. Remove the seat. (See page 4-8.)
2. Remove the air filter element by
removing the wing bolt and its
washer.
1. Wing bolt
2. Washer
3. Air filter element
3. Remove the sponge material from
the air filter element frame.
1. Sponge material
2. Air filter element frame
4. Clean the sponge material with
solvent or YAMALUBE foam air fil-
ter cleaner, and then squeeze out
the remaining liquid.
7-10
EAU84100
1
2
3
1
2
7