Yamaha YZ65P Owner's Manual page 31

1. Distance A
Spring preload:
Minimum (soft):
Distance A = 205.5 mm (8.09 in)
Standard:
Distance A = 199.0 mm (7.83 in)
Maximum (hard):
Distance A = 195.0 mm (7.68 in)
8. Tighten the locknut to the speci-
fied torque. NOTICE: Always
tighten the locknut against the
adjusting nut, and then tighten
the locknut to the specified
torque.
[ECA10122]
Tightening torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
9. Install the rear frame assembly as
shown, and then tighten the rear
frame bolts to the specified
torque.
Instrument and control functions
10. Install the muffler, and then tighten
1
11. Place the panels in their original
12. Tighten the clamp bolt.
13. Install the seat.
Rebound damping force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
4-14
Tightening torque:
Rear frame bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
the muffler bolt to the specified
torque.
Tightening torque:
Muffler bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
position, and then install the bolts.
4