Panasonic EP1022 Operating Instructions Manual page 11

PROGRAMMED MASSAGE
First read, and familiarize yourself with, the safety precautions and operating precautions.
<HOW TO PRESET THE MASSAGE HEAD POSITION>
1. Press the "start/reset" button.
2. Use the "massage head adjustment button" to toggle from the on] |
highest (tallest) "1" to lowest (shortest) "5" setting.
Rollers should rest comfortably at the top of your shoulders Neck
prior to the massage starting. highest 1 ° Roller
3. Once you have made the adjustment, you can do any o | Position
massage you like. =
"The whole back massage will automatically start often 30 lowest 5 ©
seconds when you don't push any programmed operation. :
4. You can adjust this feature during the massage. Massage heads adjustment
NOTE: The purpose of this button is to limit how high the button
massage heads will go on your neck and head. We
recommend that a person 6 ft. (1.82 m) or greater use
the setting in "1", while 5 ft. (1.52 m) or shorter use the
setting "5".
«HOW TO SELECT THE PROGRAMMED MASSAGE COURSE»
1. If you wish to massage your whole back, press the "whole back" [4i ] button.
2. If you wish to massage your neck and shoulder mainly, press the "neck shoulder" (à) button.
3. If you wish to massage your lower back, press the "lower back"[À | button.
eMassage will operate automatically for mainly 15 minutes after pressing the button.
NOTE: Check to be sure the course indicator lamp is lit.
elf you wish to change the massage course, press any button you want.
You may change the massage course at any time during operation without harm.
Your new instructions will override any previous ones.
Programmed operation Programmed operation Programmed operation
whole back neck shoulder lower back whole back neck shoulder lower back whole back neck shoulder lower back
di (alala)
En tapping ZN tapping A
"M
o)
<whole back> <neck shoulder> <lower back>
<FOR THOSE WHO WISH TO HAVE MASSAGE WITHOUT TAPPING>
Programmed operation
tapping
7 < o off
o off En
SS
e Press when you feel you will not need tapping in the middle of programmed massage course.
(The tapping changes into kneading)
X Press the tapping button again to cancel.
11