Panasonic EP1022 Operating Instructions Manual page 10

HOW TO USE
Before using, first read all the instructions including the warnings, safety and operating precautions as well as
the section on programmed and manual massage.
«BEGINNING OPERATION»
1. To operate the massager, press the "start/reset" button.
9 Check to be sure the operation indicator lamp is lit.
Operation indicator
lamp
highest 1 o, Roller
9| Position
go
o
lowest 5 o
2. If you wish to stop the massage "immediately" press the "stop" button.
The massage heads will stop where they are.
e Check to be sure the operation indicator lamp goes out. To resume massage, press the "start/reset"
button.
o
start
E FOR
Neck
highest 1 oy Roller
o| Position
go
o
lowest 5o
3. After final use, press the "start/reset" button.
e The massage heads will go up, spread out and stop in the restore position. With the heads in this
position you can sit comfortably, using the massager as a regular chair.
€ Be sure to store the controller in the pocket on the side of the left arm rest when not in use.
Operation indicator S
ue Dems
P Neck
highest 1° Roiler
1 Positlon
C)
go
o
lowest 5 ©
Automatic timer for massage lounger
e To prevent excessive massage there is a built-in timer which, after approx. 15 minutes of operation, will
automatically return the massage heads to the "restore" position and stop their motion.
e Turning on the operation switch while the massage heads are moving to the "restore" position will reset
the time for another 15 minutes (approximately).
e |f the programmed massage button is pressed, the unit will stop after finishing the program.
10