General Notes; Conformity; Application; Function - SMARTFOX PRO LIGHT 2 Operating Instructions Manual

GENERAL INFORMATION

General notes

These operating instructions are part of the scope of delivery. They contain the
information required for proper use. They are intended for electrotechnical
personnel or specialists who are familiar with the installation, assembly and
commissioning of the product described here. Should further information be
required, additional information can be requested from the contact details on the
back.

Conformity

This appliance complies with the provisions of the Directive of the Council of the
European Communities on the approximation of the laws of the EC Member
States relating to electromagnetic compatibility, EMC Directive 2004/108/EC, and
the Low Voltage Directive 2006/95/EC.

Application

The "SMARTFOX Pro Light 2" energy consumption controller is used to optimise
self-consumption to a maximum in electrotechnical systems with self-power
generation. All relevant data for the application are measured, displayed and used
for control. If desired, the measured values are stored when the microSD card is
activated and shown on the 2-line (2x16 digits) display. Displayed measured
values are voltage, current and power of the individual phases L1, L2, L3 as well
as the total currents and powers. Calculated values are PNutz, work, energy,
regenerated energy.

Function

The currents to be measured are measured either directly or via current
transformers. The voltage is always measured directly (according to the
connection diagram). The main function of the unit is to detect the current surplus
power, calculated by UxI, and thus to control a continuously controllable consumer
with exactly this amount of energy. This is done via the analogue output 0/4-20mA.
In addition, a relay make contact is available with freely selectable power and
switch-on times per day.
4
w w w . s m a r t f o x . at