Bosch 0 601 B44 000 Original Instructions Manual page 28

28 | English
Tool element Storage compartment
Protective cover (3) Place in the recess on the bracket
(11) and secure using the clamping
lever (39)
Hex key (10) Place in the storage compartment
(68)
Ring spanner (9) Place in the storage compartment
(69)
Angle guide (2) Place in the storage compartment
(7)
Additional parallel Push into the groove at the back of
guide (43) the parallel guide (5) and tighten
using the wing bolts
Transporting the power tool
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Before transporting the power tool, the following steps must
be carried out:
– Bring the power tool into the transport position (see
"Transport position", page 24).
– Remove all accessories that cannot be securely fitted to
the power tool.
If possible, transport unused saw blades in a closed con-
tainer.
– Slide the saw table expansion (6) in fully and push the
clamping handle (13) downwards to secure it in place.
– Use the carrying handles (29) to lift or transport the tool.
Only use the transport devices to transport the power
u
tool and never the protective devices.
Maintenance and Service
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Cleaning
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
Noise reduction measures
Measures implemented by the manufacturer:
– Soft start
– Provided with a saw blade specially developed for noise
reduction
Measures implemented by the operator:
– Low-vibration mounting on a stable work surface
1 609 92A 714 | (01.09.2021)
– Use of saw blades with noise-reducing functions
– Regular cleaning of the saw blade and power tool
Accessories
GTA 560 saw stand
GTA 60 W saw stand
Dust bag
Saw blades for wood and fibreboard, panels and strips
for 3 601 M44 0B0 :
Standard for Wood
216 x 2.0/1.4 x 25.4 mm, 24 teeth
for 3 601 M44 000 , 3 601 M44 0K0 3 601 M44 040 :
Standard for Wood
216 x 2.0/1.4 x 30 mm, 48 teeth
Expert for Wood
216 x 1.7/1.2 x 30 mm, 24 teeth
216 x 1.7/1.2 x 30 mm, 48 teeth
Saw blades for aluminium
Expert for Aluminium
216 x 2.0/1.4 x 30 mm, 66 teeth
Saw blades for laminated panels
Expert for Laminated Panel
216 x 2.1/1.4 x 30 mm, 66 teeth
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
Article number
0 601 B22 700
0 601 B12 000
1 600 A01 ZE5
2 608 841 163
2 608 837 726
2 608 644 520
2 608 644 521
2 608 644 544
2 608 644 552
Bosch Power Tools