Page 1
Robert Bosch GmbH Power Tools Division 70764 Leinfelden-Echterdingen GCM 12 GDL Professional GERMANY www.bosch-pt.com 1 609 92A 285 (2015.11) PS / 481 de Originalbetriebsanleitung Orijinal işletme talimatı mk Оригинално упатство за работа en Original instructions pl Instrukcja oryginalna sr Originalno uputstvo za rad Notice originale cs Původní...
This will en- protection. Protective equipment such as dust mask, sure that the safety of the power tool is maintained. non-skid safety shoes, hard hat, or hearing protection Bosch Power Tools 1 609 92A 285 | (11.11.15)
Page 16
Keep your fingers clear of the movable parts of the agent for Bosch power tools. Replace damaged exten- glide arm. Danger of fingers being crushed or contused sion cables. This will ensure that the safety of the power and considerably injured.
Page 17
Ø 305 mm Ø Observe the dimensions of the saw blade. The hole diameter must match the tool spindle without play. Do not use reduc- ers or adapters. Bosch Power Tools 1 609 92A 285 | (11.11.15)
(GTA 2500 W, GTA 3700, GTA 3800) (see figure b2) health or carcinogenic, use a special vacuum cleaner. With the height-adjustable legs, Bosch GTA saw stands pro- Cleaning the Extraction Adapter vide firm support for the power tool on any surface. The work-...
– Firmly clamp the workpiece by turning the threaded rod Glide arm pulled completely to the front: 58 in clockwise direction. – Pull glide arm 28 forward to the stop. The glide mechanism is now completely extended. Bosch Power Tools 1 609 92A 285 | (11.11.15)
– To switch off the machine, release the On/Off switch 60. The clamping force of the lock lever must securely hold the position of the glide arm at any bevel angle. 1 609 92A 285 | (11.11.15) Bosch Power Tools...
Minimum workpiece sizes (= all workpieces that can be clamped left or right from the saw blade with the supplied material clamp 22): 160 x 335 mm (length x width) Cutting depth, max. (0°/0°): 104 mm Bosch Power Tools 1 609 92A 285 | (11.11.15)
Page 24
– Now, push the glide arm toward the fence 10 and saw through the workpiece with uniform feed. – Switch off the machine and wait until the saw blade has come to a complete stop. – Slowly guide the glide arm upward. 1 609 92A 285 | (11.11.15) Bosch Power Tools...
Page 25
The finished work- ... to the right of the ... to the left of the ... to the left of the ... to the right of the piece is located ... Bosch Power Tools 1 609 92A 285 | (11.11.15)
Page 26
Arm: (see figure T4) are required for this. – Loosen the two screws 65 of laser protection cap 27 with A Bosch after-sales service station will handle this mainte- the hex key (4 mm) 20. nance task quickly and reliably.
Page 27
10 and the saw blade 40 on the saw table 38. The leg of the angle gauge must be flush with the saw blade 40 over the complete length. Bosch Power Tools 1 609 92A 285 | (11.11.15)
Denham If the replacement of the supply cord is necessary, this has to Uxbridge be done by Bosch or an authorized Bosch service agent in or- UB 9 5HJ der to avoid a safety hazard. At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Page 29
Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally cor- rect manner. Subject to change without notice. Bosch Power Tools 1 609 92A 285 | (11.11.15)
Page 30
AB Uygunluk beyanı Tek sorumlu olarak, tanımlanan ürünün aşağıdaki yönetmelik ve direktiflerin geçerli bütün hükümlerine ve aşağıdaki standartlara uygun olduğunu beyan Panel testere Ürün kodu ederiz. Teknik belgelerin bulunduğu yer: * 1 609 92A 285 | (16.11.15) Bosch Power Tools...