Apps - Axis M5000-G User Manual

AXIS M5000-G PTZ Camera
The web interface
Play the recording.
Stop playing the recording.
Show or hide information and options about the recording.
Set export range: If you only want to export part of the recording, enter a time span.
Encrypt: Select to set a password for exported recordings. It will not be possible to open the exported file without the password.
Click to delete a recording.
Export: Export the whole or a part of the recording.
Click to filter the recordings.
From: Show recordings done after a certain point in time.
To: Show recordings up until a certain point in time.
Source : Show recordings based on source. The source refers to the sensor.
Event: Show recordings based on events.
Storage: Show recordings based on storage type.

Apps

Add app: Install a new app.
Find more apps: Find more apps to install. You will be taken to an overview page of Axis apps.
Allow unsigned apps: Turn on to allow installation of unsigned apps.
Allow root-privileged apps: Turn on to allow apps with root privileges full access to the device.
Note
The device's performance might be affected if you run several apps at the same time.
Use the switch next to the app name to start or stop the app.
Open: Access the app's settings. The available settings depend on the application. Some applications don't have any settings.
The context menu can contain one or more of the following options:
• Open-source license: View information about open-source licenses used in the app.
• App log: View a log of the app events. The log is helpful when you contact support.
• Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device
doesn't have internet access.
If you don't have a license key, go to axis.com/products/analytics. You need a license code and the Axis product serial
number to generate a license key.
33