Carrier KSACN0901AAA Owner's Manual page 9

Start and Stop Operation
• Press POWER (Fig. 10) to power on the
controller.
Fig. 10 — Power
To Set the Operation Mode
• Press MODE (see Fig. 11) to set the
OPERATION MODE (see Fig. 12) (HEAT
function is invalid for a COOL only type unit).
Fig. 11 — Mode
Fig. 12 — Operation Modes
OM-KSACN0901-02 Specifications subject to change without notice.
Room Temperature Setting
1. Press the UP or DOWN arrow (Lower or Raise
(see Fig.13)) to set the room temperature.
NOTE: This function in unavailable in FAN mode.
Lower
Fig. 13 — Up or Down Arrows (Lower and
Indoor Setting Temperature Range:
62°F~86°F (17°C~30°C)
2. °F and °C Scale Selection - Press and
hold the UP or DOWN arrow for 3 seconds
to alternate the temperature display
between the °F and °C scale.
Raise
Raise)
9