Dell Alienware x16 R2 Owner's Manual page 120

Table 40. System setup options—Update, Recovery menu (continued)
Update, Recovery
Table 41. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Auto On Time
First Power On Date
Set Ownership Date
Diagnostics
OS Agent Requests
Power-on-Self-Test Automatic Recovery
Table 42. System setup options—Keyboard menu
Keyboard
Fn Lock Options
Lock Mode
RGB Per Key Keyboard Language
Table 43. System setup options—Preboot Behavior menu
Preboot Behavior
Adapter Warnings
120
By default, the Dell Auto OS Recovery Threshold value is set to 2.
Displays the Service Tag of the computer.
Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE: Once set in BIOS, the Asset Tag cannot be changed.
Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Allows you to set ownership date.
By default, the First Power On Date option is disabled.
When enabled, Dell OS Agent(s) will be capable of scheduling onboard diagnostics
on a subsequent boot which can help assist in the prevention and resolution of
hardware related issues.
When disabled, Dell OS Agents(s) will not be capable of scheduling any onboard
diagnostics and scans must be initiated manually in the pre-boot environment.
When enabled, if the computer should become unresponsive before completing the
BIOSPower-On-Self-Test (POST), the BIOS will attempt to automatically recover the
computer.
By default, the Power-on-Self-Test Automatic Recovery option is enabled.
Enables or disables the Fn Lock option.
By default, the Fn Lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F12 keys scan the code for their secondary functions.
Allows you to select the language that matches the keyboard installed on your
system.