Important Instructions; For Your Safety - Kettler HOI FRAME Assembly Manual

Hide thumbs Also See for HOI FRAME:
Table of Contents

Advertisement

IMPORTANT INSTRUCTIONS

information which is important for your safety as well as for the use and maintenance of the device. Keep these
instructions in a safe place for reference purposes, maintenance work and to assist you when ordering spare
parts.

FOR YOUR SAFETY

This device can be used by people 14 years of age and
older
Children are not allowed to play with the device.
Cleaning and user maintenance must not be carried
out by children without supervision.
DANGER! During assembly of the product, keep chil-
dren away (Swallow small parts).
DANGER! The device requires a mains voltage of
100-240V, 50Hz. - Connect the power cord to a
properly grounded socket. Do not use multiple sockets
for connection! If an extension cable is used, it must
comply with VDE guidelines. The device may only be used
with the originally supplied power adapter. Never
intervene in the main power supplying the product
yourself, if
electrical cable does not become trapped or
becomes a "trip hazard".
WARNING! This device is designed for home use
may only be used in dry interior areas.
Any other use is prohibited and potentially dangerous.
The manufacturer cannot be held responsible for dama-
ge caused by improper use.
The device may only be used for its intended purpose (i.e.
for the physical training of adults).
DANGER! Inform people present (especially children) of
possible dangers during the exercise.
DANGER! Always pull the mains plug before any repair,
mainenance, and before cleaning.
DANGER! Improper repairs and structural changes
(disassembly or original parts, attachment of non-appro-
ved parts, etc.) may pose a risk to the user.
DANGER! All electrical devices emit electromagnetic
signals when they are in operation. Be careful not to use
particularly high radiation devices in the vicinity of the
cockpit or control electronics, otherwise the displayed
WARNING! Please also pay attenton to the instructions
for training in the training instructions.
WARNING! All interventions/manipulations of the de-
vice not described here can cause damage or endanger
the user. Further interventions are only permitted by
specially trained personnel.
WARNING! The training device is intended exclusively
for home use. You train with a device that has been de-
signed according to the latest safety standards. Possib-
le danger points that can cause injuries are avoided and
secured in the best possible way. In case of doubt and
if you have any questions, please contact your dealer or
HOI Service. Carry out a check of all equipment parts,
especially the screws and nuts, approximately every 1
to 2 months. Before starting yourtraining, have your
2
family doctor clarify whether your health is suitable for
the basis for the construction of your training program.
Incorrect or excessive training can lead to damage to
your health.
Before each use, always check all screw and plug con-
nections as well as respective safety devices for their
Our products are subject to constant, innovative quality
assurance. We reserve the right to make technical
changes resulting from this.
The location of the device must be chosen in such a way
red. The free area around the machine must be at least
1 meter larger than the training area. Make sure that no
one else is in the free area while the device is in use.
Observe the general safety regulations and precautions
for handling electrical equipment.
When not in use for a long period of time, unplug the
product from the power outlet.
Only exercises from the training instructions may be
carried out on this training device.
The training device must be setup on a level surface.
Place suitable cushioning material underneath (rubber
mats or similar) to absord shock. Only for devices with
weights: avoid hard impact of the weights.
When assembling the product, pay attention to the
recommended rotational dimensions (= xx Nm).
from the mechanical performance displayed.
For devices without a freewheel, note that the moving
parts cannot be stopped immediately.
The training device complies with ISO 20957, class HA.
HB and HC class devices are not suitable fore high
accuracy.
The product is not suitable for a body weight of more
than
.
The device has an elecromagnetic braking system. This
is a speed-dependent/speed-independent depending on
the computer setting.
HEART RATE MONITORING / HRC TRAINING
DANGER! Heart rate monitoring systems may be inac-
curate. Excessive exercise can result in serious injury or
death. Stop exercising immediately if you feel dizzy or
weak.
WARNING! If the pulse signal is lost, the power from the
device will stay constant for 60 seconds and then slowly
ramp down. Please check your heart rate measurement
system (e.g. heart rate chest strap) so that the signal
can be picked up again by the electronics. For heart rate
training (HRC) a chest strap is recommended for better
accuracy.
This manual can also be downloaded from
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bk1055-400usBk1055-700us

Table of Contents