Operating The Hood; Lamp Replacement - Beko BHCIW 31322 BBH User Manual

Using the appliance
3

3.3 Operating the hood

• Hood is equipped with a motor having
various speed settings.
• For a better performance, we advise you
to use low speeds in normal conditions,
and high speeds when smell and vapors
are intensified.
• You can start the hood by pressing the
desired speed level key.(B, C, D)
• You can illuminate the cooking area by
pressing the light key. (A)

3.4 Lamp replacement

• Before replacing the light
bulbs, disconnect the power
supply of the hood.
A
• Do not touch the light bulbs
when they are hot.
• Be careful not to touch the
replaced light bulb directly
with hands.
C
You may procure lamps from
Authorised Service Agents.
Replacing lighting
GU10
Symbol Mounting of bulb
Symbol Removal of bulb
10 / EN
Lamp
Bulb power
Holder/Socket
Bulb voltage
Size
ILCOS Code
Luminous flux
Correlated colour
temperature
This product contains a light source of
energy efficiency class "A".
3.5 Operation with flue
connection
•
• The diameter of the flue duct must be
3.6 Operation without flue
connection
•
2
1
1
2
• In flueless use, remove the flaps inside
• Remove the oil filter. To install the car-
3 W
GU10
230 V
53x50 mm
DR/F-3-230-GU10-50
255 lm
3000 K
Vapour is extracted through
the flue duct, which is fas-
tened to the connection
head on the hood.
the same as the connection ring. In hori-
zontal settings, the pipe has to have a
slight upward slope (around 10º) so that
the air can exit the room easily.
Air is filtered through the car-
bon filter and recirculated in
the room. Carbon filter is
used when it is impossible to
use a flue in the house.
the flue adapter.
bon filter, fit the filter to the tabs by cen-
tring it on the plastic piece on both sides
Cooker Hood / User Manual