Operating The Hood - Beko BHCI 31322 BBH User Manual

Using the appliance
3

3.3 Operating the hood

• Hood is equipped with a motor having
various speed settings.
• For a better performance, we advise you
to use low speeds in normal conditions,
and high speeds when smell and vapors
are intensified.
• You can start the hood by pressing the
desired speed level key.(B, C, D)
• You can illuminate the cooking area by
pressing the light key. (A)
3.4 Lamp replacement
Replacing lighting
GU10
Symbol Mounting of bulb
Symbol Removal of bulb
Lamp
Bulb power
3 W
Holder/Socket
GU10
Bulb voltage
230 V
Size
53x50 mm
ILCOS Code
DR/F-3-230-GU10-50
Luminous flux 255 lm
Correlated colour 3000 K
temperature
This product contains a light source of
energy efficiency class "A".
Cooker Hood / User Manual
3.5 Operation with flue
connection
•
2
• The diameter of the flue duct must be
1
1
2
3.6 Operation without flue
connection
•
• In flueless use, remove the flaps inside
• Remove the oil filter. To install the car-
• Replace aluminium oil filter.
• Before replacing the light
bulbs, disconnect the power
supply of the hood.
A
• Do not touch the light bulbs
when they are hot.
• Be careful not to touch the
replaced light bulb directly
with hands.
C
You may procure lamps from
Authorised Service Agents.
Vapour
through the flue duct,
which is fastened to the
connection head on the
hood.
the same as the connection ring. In hori-
zontal settings, the pipe has to have a
slight upward slope (around 10º) so that
the air can exit the room easily.
Air is filtered through the car-
bon filter and recirculated in
the room. Carbon filter is
used when it is impossible to
use a flue in the house.
the flue adapter.
bon filter, fit the filter to the tabs by cen-
tring it on the plastic piece on both sides
of the fan body. Tighten it by turning
right or left.
is extracted
11 / EN