Sharp InGlass PN-LA862 Setup Manual page 2

IMPORTANT:
To aid reporting in case of loss or theft, please record the
product's model and serial numbers in the space provided.
The numbers are located in the rear of the product.
The wires in this mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth
• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.
Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.
"WARNING: THIS APPARATUS MUST BE EARTHED."
WARNING:
This Monitor is for use only with the cart, stand and/or carrier whose model name is shown below.
Use with other the cart, stand and/or carrier may result in instability causing injury.:
PN-ZS703B
Supplier's Declaration of Conformity
SHARP INTERACTIVE DISPLAY, PN-LA862, PN-LA752, PN-LA652
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
100 Paragon Drive, Montvale, NJ 07645
TEL: 1-800-BE-SHARP www.sharpusa.com
FOR CUSTOMERS IN U.K.
IMPORTANT
GREEN-AND-YELLOW:
BLUE:
BROWN:
or coloured green or green-and-yellow.
Model No.:
Serial No.:
Earth
Neutral
Live
Australia and New Zealand Only
U.S.A. ONLY
U.S.A. ONLY