Ryobi RYi6522 Operator's Manual page 11

Inverter generator
Table of Contents

Advertisement

Available languages

Available languages

SYMBOLS
FUEL CAP WARNING
Never remove fuel cap when unit is running. Shut off
engine and allow the unit to cool at least five minutes.
Remove cap slowly to release any pressure built up in
the fuel system and to avoid the heat from the muffler
igniting fuel vapors.
FUEL WARNING
No smoking when filling with gasoline. Do not
overfill. Full level is 1 in. below the top of the
fuel neck. Stop the engine for five minutes
before refueling to avoid the heat from the
muffler igniting fuel vapors.
ENGINE LUBRICANT WARNING
You must add lubricant before first
operating the generator. Always
check the lubricant level before
each operation. The lubricant level
should always register between
the hatched areas on the dipstick.
The unit is equipped with a sensor
which will automatically shut off
the engine if the lubricant level falls
below a safe limit.
GROUNDING WARNING
This generator does not include
a ground rod or copper wire. Call
a qualified electrician for local
grounding requirements.
SPARK ARRESTOR
Operation of this equipment may create sparks that
can start fires around dry vegetation. A spark arrestor
may be required. The operator should contact local fire
agencies for laws or regulations relating to fire preven-
tion requirements.
HOT SURFACE WARNING
Do not touch the muffler or aluminum cylinder of the
engine. They are very HOT and will cause severe burns. Don't
put body parts or any flammable or combustible materials
in the direct path of the exhaust.
CLEARANCE WARNING
While operating and storing, keep at least 3 feet of clearance
on all sides of this product, including overhead. Allow a mini-
mum of 30 minutes of "cool down" time before
storage. Heat created by muffler and exhaust
gases could be hot enough to cause serious
burns and/or ignite combustible objects.
7 — English

Advertisement

Table of Contents
loading

Table of Contents