Table of Contents
Advertisement
Item
NETWORK
SETUP
SSID SCAN
/
WIRELESS
(continued)
SETUP
(continued)
The OSD below is displayed while the connection
is in progress.
The keys other than RESET button are not
The connection process is interrupted when
pressing the RESET button.
The OSD below is displayed when the connection
process is complete.
The message below is displayed when the
connection is not established correctly.
LIST
NOTE
changed when encryption lock is enabled
in Network Settings – Wireless Setup in
Projector Web Control. Refer to Encryption
encryption, and Shared Key Authentication
is not supported. The authentication with an
access point is succeeded and it is regarded
that the connection is established normally
due to Open System Authentication, but data
cannot actually be transmitted.
The icon indicating the connection status
connection is complete.
2. Connection to the network
Description
･ Encryption settings cannot be
43)
Connection
succeeded
Connection failed
enabled
25
Advertisement
Table of Contents
