Child Lock Function; Swing Function - Tesla TT27TP61S-0932IAWUV Operating Instructions Manual

HEATING MODE
The heating function allows the air
conditioner to heat the room.
To activate the heating function (HEAT), press the
button until the symbol
display. With the button
than that of the room.
In HEATING operation, the appliance can
automatically activate a defrost cycle, which is
essential to clean the frost on the condenser so
as to recover its heat exchange function. This
procedure usually lasts for 2-10 minutes. During
defrosting, indoor unit fan stop operation.
After defrosting, it resumes to HEATING mode
automatically.
(For North American market) If necessary, you
can press ECO button 10 times within 8 seconds
under heating mode to start the forced defrosting.
It will defrost the outdoor ice much more fast.
FAN SPEED function (FAN
button)
Change the operating fan speed.
Press button to set the running fan speed, it can
be set to AUTO/ MUTE/ LOW/ LOW-MID / MID/ MID-
HIGH/ HIGH/ TURBO speed circularly.
Child-Lock function
1. Long press and
to active this function, and do it again to deactivate
this function.
2. Under this function, no single button will active.
TIMER function ---- TIMER ON
To automatic switch on the appliance.
When the unit is switch-off, you can set the TIMER ON.
To set the time of automatic switch-on as below:
1. Press button first time to set the switch-on,
and will appear on the remote display and
flashes.
2. Press or to button to set desired Timer-on time.
Each time you press the button, the time increases/
appears on the
or set a temperature higher
button together
decreases by half an hour between 0 and 10 hours
and by one between 10 and 24 hours.
3. Press button second time to confirm.
4. After Timer-on setting, set the needed mode (Cool/
Heat/ Auto/ Fan/ Dry), by press the
And set the needed fan speed, by press
button. And press
temperature.
CANCEL it by press
TIMER function ---- TIMER OFF
To automatic switch off the appliance.
When the unit is switch-on, you can set the TIMER OFF.
To set the time of automatic switch-off, as below:
1. Confirm the appliance is ON.
2. Press the
switch-off.
Press or to set the needed timer.
3. Press button at the second time to confirm.
CANCEL it by press
Note: All programming should be operated within 5
seconds, otherwise the setting will be cancelled.

SWING function

1. Press the button SWING to activate the louver,
1.1 Press to activate the horizontal flaps to swing
from up to down, the
display.
1.2 Press to active the vertical deflectors to swing
from left to right, the
display.
1.3 Do it again to stop the swing movement at the
current angle.
2. If the vertical deflectors are positioned manually
which placed under the flaps, they allow to move the
air flow direct to rightward or leftward.
3. Long press or
angles of the airflow direction.
41
button.
or to set the needed operation
button.
button at first time to set the
button.
will appear on the remote
will appear on the remote
over 3 seconds to select more
ENG