Table of Contents
Advertisement
handle. Grip both handles with the thumbs and fi ngers encircling the handles. Ensure that your left
hand is holding the front handle so that your thumb is underneath.
STARTING THE CHAIN SAW
See page 23.
1. Before starting for operation, you should install the battery pack in the machine, and make
sure chain brake is in run position by pulling chain brake lever / hand guard toward the front
handle.
2. To start the machine: pull the trigger release, and then press the throttle trigger.
CHECKING AND OPERATING CHAIN BRAKE
1. Engage the chain brake by rotating your left hand around the front handle. Allow the back
of your hand to push the chain brake lever/hand guard toward the bar while the chain is
rotating rapidly. Be sure to maintain both hands on the saw handles at all times.
2. Reset the chain brake back into the Run position by grasping the top of the chain brake
lever / hand guard and pulling toward the front handle until you hear a click.
WARNING
If the chain brake does not stop the chain immediately, or if the chain brake will
not stay in the run position without assistance, take the saw to an authorised
service centre for repair prior to use.
TRANSPORTATION AND STORAGE
See page 34.
•
Stop the machine, remove the battery pack and allow the tool to cool before storing or
transporting.
•
Clean all foreign material from the product. Store it in a cool dry and well-ventilated place that is
inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing
salts. Do not store outdoors.
•
Fit guide bar cover before storing the unit, or during transportation.
•
For transportation, secure the machine against movement or falling to prevent injury to persons
or damage to the machine.
19
EN
Advertisement
Table of Contents
