Savio TWS-11 User Manual

ENGLISH
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other
people on the portal ceneo.pl, social media or on the website of the
store where you made the purchase. If you want to show our device on
SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write
to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Before starting the use of purchased device it is recommended to read the
whole manual.
1. Product diagram:
① Multi-function touch button
② Microphone
③ Docking station / power bank
④ Charging USB-C socket in power
bank
⑤ Signalling diode of power bank
⑥ LED diodes on earphones
⑦ Silicone earpad
2. Charging device:
2.1 Charging the earphones and
power bank from an external
power source:
2.1.1 Connect the USB-C cable to
the charging socket in the
power bank.
2.1.2 Insert the earphones into the
dock (the diode placed on
the top side of power bank
will blink in white colour informing about power bank charging).
When earphones are discharged, the diodes on earphones will light
up in red colour and charging will start.
2.1.3 If the power bank is fully charged, white diode will light up steadily.
When earphones are fully charged the diodes will turn off. Earphones
are ready to use.
2.2 Charging the earphones using the built-in power bank:
2.2.1 Insert the earphones into the power bank dock.
2.2.2 The earphones diodes will light up red to indicate charging.
2.2.3 If the earphones are fully charged, the red backlight turns off, the
earphones are ready to use.
ATTENTION!
Before charging the earphones for the first time, remove the protective stick-
ers located on the charging pins (bottom part of the earphone).
3. Earphones pairing:
3.1 Take out the earphones from the power bank, the earphones will be auto-
matically turned on, you will hear the message "Connected" indicating that
the earphones are properly connected to each other. Earphones LEDs will
flash red and white, you will hear "Waiting for connection", informing you that
they are ready to be paired with your phone.
3.2 Turn on the Bluetooth in the device (e.g. smartphone), choose SAVIO
TWS-11 earphones from Bluetooth devices, then pair them. If the head-
phones have already been paired with the device, they will be connected
automatically. After proper connection you will hear "Connected" and
the diodes of the earphones will stop blinking.
3.3 Earphones are ready to use. The notification light on the earphones will
flash white every 5 seconds, informing about a successful connection.
4. Touch control function:
Left earphone (L)
Turn on the earphones
Turn off the earphones
Make a call
End a call
Reject an incoming call
Play / Pause
Next song
Previous song Press and hold (per 2 s)
Volume increase
Volume decrease Fast, single press
Turn ON Google
Assistant / Siri
5. Description of individual LEDs:
Status
Charging
Full charge
Earphones Pairing
Connection with device
Low battery level
Wireless Bluetooth earphones
model: TWS-11
User manual
Right earphone (R)
(L or R) Press and hold (per 3 s)
(L or R) Press and hold (per 6 s)
(L or R) Single press
(L or R) Double press
(L or R) Press and hold (per 2 s)
(L or R) Double press
Press and hold (per 2 s)
Fast, single press
(L or R) Triple press
LED indicator
The red LEDs will turn on
The LEDs will turn off
Master earphone: LEDs flash red and
white
Slave earphone: LED flashes white
The LED flashes white from time to time
The LED flashes red from time to time
Status
Earphones charging
Docking
Charging of station
station
/ power bank
/ power
bank
Fully charge
Low battery level
6. Factory reset:
Take out the earphones from power bank and turn off Bluetooth function in
your smartphone. On one of the earphones press fast touch button five times.
After proper restart process, diodes on both earphones will light three times
on white colour. After the process is completed, the earphones will turn off.
7. ENC function:
This feature allows you to reduce noise during calls. This feature is always ac-
tive during a call. It cannot be turned off or on with the button.
8. Package contents:
• Wireless earphones
• USB-A to USB-C device charging cable
• Docking station / power bank
• User manual
• Silicone earpads in sizes: S, M, L
9. Technical specification:
• Bluetooth version: 5.3
• Supported Bluetooth profile: HSP, HFP, A2DP, AVRCP
• Earphones working time on single charging cycle: 6-8 h (maximum volume)
• Total working time: Up to 35 h (with use of power bank)
• Quick charge function: 5 min charging = 60 min working, 10 min charging
= 120 min working
• Impedance: 32 Ω
• Frequency response: 20 Hz – 20 kHz
• Frequency bands in which the radio equipment operates: 2400 – 2483.5 MHz
• Maximum radio-frequency power transmitted in the frequency band in
which the radio equipment operates: 4 dBm
• Built-in HD microphone: Yes
• Microphone sensitivity: -42 ± 3 dB
• Charging port: USB-C
• IPX waterproof rating: IPX4
• Weight of earphones: 2 × 4 g
10. Safety conditions:
• Use the product in accordance with its intended use, as improper use may
damage the product.
• Do not expose the device to moisture, heat or sunlight, do not use the
product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result in automatic loss of the warranty.
• Hitting or dropping may damage the product.
POLSKI
Dziękujemy za zakup produktu marki Savio!
Jeśli nasz produkt spełnił Twoje oczekiwania, podziel się swoją opinią z in-
nymi osobami na portalu ceneo.pl, w mediach społecznościowych lub
na stronie sklepu, w którym dokonałeś zakupu. Będzie nam niezmiernie
miło, jeśli zechcesz również pochwalić się naszym urządzeniem na profilu
SAVIO na Facebooku.
Jeśli jest coś, co moglibyśmy poprawić w naszych produktach, napisz
nam o tym na adres: support@savio.net.pl
Dzięki Twojej opinii będziemy mogli jeszcze lepiej dopasować produkt
do Twoich oczekiwań.
Przed przystąpieniem do korzystania z zakupionego urządzenia zaleca się
przeczytanie całej instrukcji obsługi.
1. Schemat produktu:
① Dotykowy przycisk wielofunkcyjny
② Mikrofon
③ Stacja dokująca / power bank
④ Złącze USB-C do ładowania power
banku
⑤ Dioda sygnalizująca pracę power
banku
⑥ Dioda LED na słuchawkach
⑦ Silikonowa wkładka do uszu
2. Ładowanie urządzenia:
2.1 Ładowanie słuchawek oraz po-
wer banku z zewnętrznego źró-
dła zasilania.
2.1.1
Podłącz kabel USB-C do gniaz-
da ładowania w power banku.
2.1.2 Włóż słuchawki do stacji do-
kującej (dioda powiadomień
zacznie mienić się w kolorze
białym, informując o ładowaniu power banku). W przypadku gdy słu-
chawki są rozładowane, diody słuchawek zaświecą się na czerwono
i rozpocznie się ich ładowanie.
2.1.3 Jeśli power bank naładuje się do pełna, wówczas białe diody zaświe-
cą się światłem ciągłym. W przypadku pełnego naładowania słucha-
wek, czerwone podświetlenie zgaśnie, słuchawki są gotowe do użycia
2.2 Ładowanie słuchawek z użyciem wbudowanego power banku.
2.2.1 Włóż słuchawki do stacji dokującej w power banku.
2.2.2 Diody słuchawek zostaną podświetlone na kolor czerwony sygnalizu-
jący ładowanie.
1
LED indicator
Charging: White LED will turn on for
3 sec
The LED flashes
The LEDs will turn on solid
The LED flashes white
Bezprzewodowe słuchawki Bluetooth
Instrukcja obsługi
model: TWS-11