Download Print this page

Savio TWS-06 User Manual

Wireless bluetooth earphones

Advertisement

Quick Links

ENGLISH
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion
with other people on the portal ceneo.pl, social media or on
the website of the store where you made the purchase. If you
want to show our device on SAVIO Facebook Page, we will be
very pleased.
If there is something that we could improve on our products, please
write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the prod-
uct to your expectations.
Before starting the use of purchased device it is recommended
to read the whole manual.
1. Product diagram:
Primary button: Turn on/off
Microphone
Docking station/power bank
Charging USB socket
Charging Micro USB socket
LEDs indicating power bank
operation mode
Battery level indicator
LEDs on the earphones
Earphone charging connector
2. Earphones charging:
2.1
Charging of earphones and power bank from an external power source.
2.1.1
Connect the micro USB cable into the charging socket in the power
bank.
2.1.2 Put earphones to the docking station. In case when earphones need
to be charged, the diodes will be backlit in red colour and charging
will begin. This will be indicated by the LED indicator next to the power
bank charge level indicator.
2.1.3 If the power bank will charge fully, then indicator will show the value
100 and will go off after a while.
2.1.4 When the earphones are fully charged, red backlit and charging
mode will turn off.
2.1.5 Earphones are ready to use.
2.2 Charging headphones using the built-in power bank.
2.1.1
Put earphones to the docking station in the power bank.
2.1.2 Earphones will start to charge automatically, diode placed on the
power bank will start to blink in green colour and earphones diode
will be backlit in the red colour signalizing charging process.
2.1.3 In case when the earphones are fully charged, red backlit will go off
and charging mode will be turned off.
2.1.4 Earphones are ready to use.
3. Earphones paring:
3.1
Hold the primary button placed on each on the earphones. You will hear
"Power on".
3.2 Turn on the Bluetooth mode in the transmitting device (e.g. smartphone),
then search and chose SAVIO TWS-06 earphones from the list. If the
earphones have been paired before with a device, they will connect
automatically.
3.2 After connecting with a device LED diodes on the earphones will stop to blink,
you will hear communicate „Connected". Earphones are ready to use.
4. Primary button description:
Pressing and holding the primary button for 3 seconds will cause earphones
to turn on/turn off.
4.1 During a track playback:
• Single-click: playback pause/play
• Double-quick click: select the next song
• Triple-quick click: a select previous song
4.2 During an incoming call:
• Single-click: picking up an incoming call
• Double-quick click: rejecting an incoming call
5. Charging devices using a power bank:
5.1
Connect the USB cable to the charging socket in the power bank (the bat-
tery level indicator will show the current state of charge of the power bank).
5.2 Connect the device to be charged.
5.3 After the charging process is completed, disconnect the power bank
and the device.
6. Package content:
• Wireless Bluetooth earphones SAVIO TWS-06
• Docking station/power bank
• Charging cable
• 3 pair of silicone pads
• 2 pair of foam pads for better comfort and fit and soundproof from the
outside
7. Technical specification:
• Bluetooth version: 5.0 + EDR
• Range: up to 10 meters
• Total earphones work time: up to 30 h (including power bank)
• Earphones work time on a single charging cycle: up to 4 h
• Charging time: up to 1 h
• Standby time: up to 120 h
• Impedance: 32 Ω
• Frequency Response: 20 Hz – 20 kHz
• Earphones sensitivity: -12 dB
• Sensitivity of the build-in HD microphone: -85 dB
• Frequency bands in which the radio equipment operates:
2400 – 2483.5 MHz
• Maximum radio-frequency power transmitted in the frequency band in
which the radio equipment operates: 4 dBm
• Power bank capacity: 1200 mAh
• Weight of earphones: 2 x 3.45 g
Wireless Bluetooth earphones
model: TWS-06
User manual
L
• Function keys allow: on/off earphones, next/previous track, play/pause,
answer/reject incoming calls
• Contents of the package: wireless Bluetooth earphones, charging cable,
power bank, 5 pairs of earbuds, user manual
8. Important information:
• The earphones will switch on automatically after removing them from
the power bank, they are ready to connect with a transmitting device
(e.g. smartphone).
• If there is a problem with pairing each earphones togheter or with
smarthone, restart them by turning off and turning on again.
• Alternately blinking red and blue LED placed on one of the earphones,
informs that the headphones are ready to be paired with the transmitting
device ( e.g. smartphone).
• In case when LED will not be backlit, it means that the power bank is de-
pleted and it needs to be charged.
• After 5 minutes of idle, the earphones will automatically be turned off.
• Charging the power bank does not require placing headphones in it.
9. Proper earphones placement:
10. Safety conditions:
• Use this device as intended.
• Incorrect use of the device may damage it.
R
• For charging the power bank it is highly recommended to use 1 A charger,
or charge it from a USB port in the computer
• Independent repairs and modification results in automatic loss of the
warranty.
• Hitting or dropping the device could cause damage of the device.
• The device should be used in dry area and it should be protected from
water and high humidity.
POLSKI
Dziękujemy za zakup produktu marki Savio!
Jeśli nasz produkt spełnił Twoje oczekiwania, podziel się swoją
opinią z innymi osobami na portalu ceneo.pl, w mediach społecz-
nościowych lub na stronie sklepu, w którym dokonałeś zakupu.
Będzie nam niezmiernie miło, jeśli zechcesz również pochwalić się
naszym urządzeniem na profilu SAVIO na Facebooku.
Jeśli jest coś, co moglibyśmy poprawić w naszych produktach,
napisz nam o tym na adres: support@savio.net.pl
Dzięki Twojej opinii będziemy mogli jeszcze lepiej dopasować pro-
dukt do Twoich oczekiwań.
Przed przystąpieniem do korzystania z zakupionego urządzenia zaleca
się przeczytanie całej instrukcji obsługi.
1. Schemat produktu:
Przycisk główny: Włączenie/
wyłączenie słuchawek
Mikrofon
Stacja dokująca/power bank
Złącze USB do ładowania
telefonu lub innych urządzeń
Złącze Micro USB do ładowania
power banku
Diody sygnalizujące tryb
ładowania słuchawek
Wskaźnik stanu naładowania
akumulatora w power banku
Diody LED na słuchawkach
Złącze ładowania słuchawek
2. Ładowanie urządzenia:
2.1
Ładowanie słuchawek oraz power banku z zewnętrznego źródła zasilania.
2.1.1
Podłącz kabel USB do gniazda ładowania w power banku.
2.1.2 Włóż słuchawki do stacji dokującej. W przypadku, gdy słuchawki
wymagają ładowania, diody LED w słuchawce zaświecą się na kolor
czerwony i rozpocznie się ich ładowanie. Zostanie to zasygnalizowane
poprzez diody znajdujące się obok wskaźnika poziomu naładowania
power banku.
2.1.3 Jeśli power bank naładuje się do pełna, wówczas wskaźnik nałado-
wania pokaże wartość 100 i po chwili zgaśnie.
2.1.4 W przypadku pełnego naładowania słuchawek, czerwone podświe-
tlenie zgaśnie, a tryb ładowania słuchawek zostanie wyłączony.
2.1.5 Słuchawki są gotowe do użycia.
2.2 Ładowanie słuchawek z użyciem wbudowanego power banku.
2.2.1 Włóż słuchawki do stacji dokującej.
2.2.2 Słuchawki automatycznie zaczną się ładować. Diody umieszczone
na power banku zaczną migać w kolorze zielonym, a słuchawki za-
świecą się na kolor czerwony sygnalizując tym samym ładowanie.
2.2.3 W przypadku pełnego naładowania słuchawek, czerwone podświe-
tlenie słuchawek zgaśnie, a tryb ładowania słuchawek zostanie wy-
łączony.
2.2.4 Słuchawki są gotowe do użycia.
3. Parowanie słuchawek:
3.1
Przytrzymaj przycisk główny znajdujący się na każdej ze słuchawek.
Usłyszysz w nich komunikat „Power on".
3.2 Włącz tryb Bluetooth w urządzeniu nadawczym (np. w smartfonie). Na-
stępnie włącz wyszukiwanie urządzeń i wybierz z listy słuchawki SAVIO
TWS-06. Jeżeli już wcześniej sparowano słuchawki z tym urządzeniem,
zostaną one połączone automatycznie.
45°
Bezprzewodowe słuchawki Bluetooth
Instrukcja obsługi
L
model: TWS-06
R

Advertisement

loading

Summary of Contents for Savio TWS-06

  • Page 1 "Power on". 3.2 Turn on the Bluetooth mode in the transmitting device (e.g. smartphone), then search and chose SAVIO TWS-06 earphones from the list. If the 1. Schemat produktu: earphones have been paired before with a device, they will connect ⑥...
  • Page 2 Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 Elmak Sp. z o.o. niniejszym oświadcza, że typ urządzenia radiowego TWS-06 jest (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., zgodny z dyrektywą...