Savio TWS-05 - Wireless Bluetooth Earphones Manual

Product diagram

1. Primary button: Turn on/off
2. Microphone
3. Docking station/power bank
4. Charging micro USB socket
5. LEDs indicating power bank operation mode
6. LEDs on the earphones

Earphones charging

1. Charging of earphones and power bank from an external power source
   1. Connect the micro USB cable into the charging socket in the power bank (the blue LEDs in the power bank will blink blue it is mean the power bank is charging)
   2. Put earphones to the docking station. In case when earphones are depleted, the diodes will be backlit in red colour and charging will begin.
   3. If the power bank will charge fully, then the red diodes backlit will be constant in blue colour.
   4. In case of fully charged earphones, red backlit will go off. Earphones are ready to use.
2. Charging headphones using the built-in power bank
   1. Put earphones to the docking station in the power bank
   2. Earphones will start to charge automatically, diode placed on the power bank will start to blink in blue colour and earphones diode will be backlit in the red colour signalizing charging process.
   3. In case when the earphones are fully charged, red backlit will go off
   4. Earphones are ready to use

Earphones paring

1. Hold the primary button placed on each on the earphones. You will hear "Power on"
2. Next, you will hear the communicates about channels ("Left channel, Right channel") after hearing communicates, place these headphones in your ears.
3. Communicate "Pairing" informs you that the headphones have connected properly with each other. Earphones are ready to be connected with a transmitting device (for example smartphone)
4. Turn on the Bluetooth mode in the transmitting device (e.g. smartphone), then turn on the devices search and chose SAVIO TWS-05 earphones from the list. If the earphones have already been paired with a given device, they will connect automatically.
5. After connecting with a device LED diodes on the earphones will stop to blink, you will hear comunnicate "Connected".
   Earphones are ready to use.

Primary button description

Clicking and holding the primary button for a longer time will cause earphones to turn on/turn off

1. During a track playback:

• Single-click: playback pause/play
• Double-quick click: select the next song
• Triple-quick click: a selection of the last selected song

2. During an incoming call:

• Single-click: picking up an incoming call
• Click and hold: rejecting an incoming call

Power bank operation diagram

Power bank operation diagram is presented on the table below:

Package content

• Wireless Bluetooth earphones SAVIO TWS-05
• Docking station/power bank
• Charging cable
• 2 pair of silicone pads
• 2 pair of foam pads for better comfort and fit and soundproof from the outside

Technical specification

• Bluetooth version: 5.0
• Range: up to 10 meters
• Total earphones work time: up to 17,5 h (including power bank)
• Earphones work time on a single charging cycle: up to 2,5 h
• Charging time: up to 40 minutes
• Standby time: up to 120 h
• Impedance: 32 Ω
• Frequency Response: 42 dB
• Sensitivity: 20 Hz -20kHz
• Built-in microphone: Yes- Weight of earphones: 7,2g

Important information

• The headphones will switch on automatically after removing them from the power bank -they are ready to connect with a transmitting device (e.g. smartphone)
• Alternately blinking red and blue LED placed on one of the earphones, informs that the headphones are ready to be paired with the transmitting device ( e.g. smartphone)
• In case when LED will not be backlit, it means that the power bank is depleted and it needs to be charged
• After 5 minutes of idle, the earphones will automatically be turned off
• To charge the power bank, it is recommended to use a 1A charger, or you can charge it using a USB port on your computer.
• Charging the power bank does not require placing headphones in it.

Proper earphones placement

This symbol means that in according with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.

Producent:
Elmak Sp. z o.o.
Ul. Morgowa 81
35-323 Rzeszów
www.elmak.pl
www.savio.net.pl

Documents / Resources

References

• Strona główna - ELMAK Sp. z o.o.
• Strona główna - Savio

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Savio TWS-05 - Wireless Bluetooth Earphones Manual