Factory Setting - QCY T18 User Manual

Factory Setting

Restoring the earbuds to factory settings may be useful if the earbuds fail to connect with the
phone.
Put the earbuds into the case and leave it open. Hold the button on the case for ten seconds
to set them to their factory settings. LEDs on earbuds blinking white means they are reset.
After that, they will be connectable to the phone again.
Charging
Charging the Case
LED glows solid red when the case is being charged. LED glows solid blue when the case is
fully charged.
LED Indicators on the Case
When the battery level of the case is over 20%, the indicator glows blue. When the battery
level of the case is under 20%, the indicator glows red.
5