Reset To Factory Settings - QCY T1 User Manual

PROBLEMS WITH STEREO MODE

Reset to factory settings

If the headphones can no longer be connected, you can reset them to the factory settings.
Take the headphones out of the charging box and switch them o manually (press the QCY
button for 2 seconds). Then release the QCY button.
Press the QCY button for approx. 25 seconds. The headphones ash red / white, then the
headphones switch automatically o . Please keep the QCY key pressed. The headphones
light up red / white again. Then put the headphones back in the charging case and then
connect the headphones with your smartphone again.
Tips and hints
The headphones automatically start stereo mode as soon as they are taken out of the
charging box. If you only hear music on one headset, please reset it to the factory settings.
If your smartphone requires a pin to connect, please use "0000".
If there is no active connection to your smartphone, the headphones will automatically
switch o after 5 minutes and stop the stereo mode. Then turn the headphones o and put
them back in the charging box. If you remove it again, the stereo mode will start again.