Table of Contents
Advertisement
SECTIONS
Table of Contents
INSTaLLaTION
Step 2 – Power ON the Combiner
1. Turn ON both PCs.
2. Connect the power supply and power ON the Combiner.
The Combiner boots up, as follows:
•
If you are using the Combiner for the first
time, the default display mode is picture-
in-picture (PiP).
•
Otherwise, the Combiner boots into the
display mode used during the previous
power on, including either:
– full-screen - either channel #1 only or
channel #2 only
– Picture-in-picture (PiP)
– Side-by-side
– Custom mode
Note: In case no picture is presented after powering on the Combiner,
connect an alternate display to the combiner's display console port, or
perform a reset to factory default.
HSL Secure 2-Port KVM Combiner User Manual
1
2
Move mouse
to switch PCs
PC #1
Speakers
PC #2
Single
Keyboard & Mouse
3
Multiple Sources
SECURE
SECURE
KVM COMBINER
KVM COMBINER
4
Advertisement
Table of Contents
