Subscribe to Our Youtube Channel
Related Manuals for HighSecLabs FT10N-N
Summary of Contents for HighSecLabs FT10N-N
- Page 1 RS232 Protocol Convertor | USER MANUAL Table of Contents SECTIONS RS232 Protocol Convertor User Manual HDC24387 Rev1.0 KVM Remote RS-232 Control | QUICK SETUP GUIDE...
- Page 2 TABLE OF CONTENTS Introduction Installation Programming Diagram RS232 Protocol Convertor | USER MANUAL...
- Page 3 Introduction The HSL’s FT10N-N is a protocol convertor from RS-232 to USB. This product allows serial – RS232 control of HSL’s combiners and “M” line products that don’t have a billed in serial control. Installation Installing the protocol convertor: Cable Installation: •...
- Page 4 #define KEY_A Stop bits – 1 #define KEY_B Parity – None Flow Control – None #define KEY_C FT10N-N Commands: #define KEY_D All commands must start with # #define KEY_E All HSL commands for Combiners and KVM starts with the following commands:...
- Page 5 Programming Command Hex Code Command Hex Code #define KEY_Q #define KEY_8 #define KEY_R #define KEY_9 #define KEY_S #define KEY_0 #define KEY_T #define KEY_RETURN #define KEY_U #define KEY_ESCAPE #define KEY_V #define KEY_BACKSPACE #define KEY_W #define KEY_TAB #define KEY_X #define KEY_SPACE #define KEY_Y #define KEY_MINUS #define KEY_Z #define KEY_EQUAL...
- Page 6 Programming Command Hex Code Command Hex Code #define KEY_COMMA #define KEY_SCROLL_LOCK #define KEY_PERIOD #define KEY_PAUSE #define KEY_SLASH #define KEY_INSERT #define KEY_CAPS_LOCK #define KEY_HOME #define KEY_F1 #define KEY_PAGE_UP #define KEY_F2 #define KEY_DELETE #define KEY_F3 #define KEY_END #define KEY_F4 #define KEY_PAGE_DOWN #define KEY_F5 #define KEY_ARROW_RIGHT #define KEY_F6 #define KEY_ARROW_LEFT...
- Page 7 #define KEY_KEYPAD_0 #define KEY_KEYPAD_DECIMAL Command example: #define KEY_EUROPE_2 Select channel 1: #define KEY_APPLICATION KVM Keyboard command – L CTRL | L CTRL | 1 FT10N-N command - #ANATL 1E #define KEY_POWER #define KEY_KEYPAD_EQUAL #define KEY_F13 RS232 Protocol Convertor | USER MANUAL...
- Page 8 Programming See a list of common commands for Combiner and KVM: Description Translator Code KB Hotkey L CTRL | L CTRL Switch to channel 1 #ANATL L CTRL | L CTRL Switch to channel 2 #ANATL L CTRL | L CTRL Switch to channel 3 #ANATL L CTRL | L CTRL...
- Page 9 Programming KB Hotkey Description Translator Code L CTRL | L CTRL F11 I Toggle left/right control key #ANATL F11 L CTRL | L CTRL F11 E Toggle enable/disable-external-switching option #ANATL F11 L CTRL | L CTRL F11 H Toggle enable/disable-cursor-parking option #ANATL F11 L CTRL | L CTRL F11 R...
- Page 10 Diagram RS232 Protocol Convertor | USER MANUAL...
- Page 11 Highseclabs.com ©2020 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL). All other marks are the property of their respective owners. Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSL...
Need help?
Do you have a question about the FT10N-N and is the answer not in the manual?
Questions and answers