HighSecLabs SC21H-M User Manual page 4

SECTIONS
Table of Contents
INSTaLLaTION
Installing the Combiner
Step 1 – Combiner Installation
1. Verify that all peripherals and computers are turned Off before
connecting them to the Combiner.
2. To the Combiner's Console ports, connect the keyboard, display,
mouse, and audio peripherals.
3. To the Combiner's computer ports - for each of the two computers
- connect the keyboard, display, mouse, and audio cables. Make sure
that each computer cable is connected to the same computer-port
group.
Note: The two computers are represented by push buttons on the
product's front panel. Once the Combiner is powered ON, you can
switch peripherals between the computers, by pressing either button.
HSL Secure 2-Port KVM Combiner User Manual
1 2
Audio
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
3
Display
Keyboard Mouse
CONSOLE PORTS COMPUTER PORTS
Computers
3