HighSecLabs SC21H-M User Manual page 10

SECTIONS
Table of Contents
OPERaTION
Switching Channel Control
To eliminate the need to press the Combiner's front-panel buttons, you
can switch between channels, using:
•
Mouse movement
•
Keyboard shortcuts
Switching Channel Control - Using a Mouse
In User mode, you can switch keyboard-and-mouse control - from one
computer to the other – by simply dragging the mouse cursor over the
computer's channel window border.
for example:
1. Display channels in side-by-side mode, by pressing:
Left Ctrl | Left Ctrl | s
2. Now, move the mouse cursor between Channels #1 and #2, to freely
switch keyboard-and-mouse control.
Note: This works in all other display modes.
Channel Channel
#1 #2
HSL Secure 2-Port KVM Combiner User Manual
1 2
Switching Channel Control - Using Keyboard Shortcuts
In User mode, you can switch keyboard-and-mouse control -from one
computer to the other - by using the following keyboard shortcuts:
•
To switch control to Channel #1, press:
Left Ctrl | Left Ctrl | 1
•
To switch control to Channel #2, press:
Left Ctrl | Left Ctrl | 2, OR –
•
To swap between channels, press:
Left Ctrl | Left Ctrl | w
Note: This works in all display modes.
3
9