Advertisement
STEP 2:
Drill Pocket-Holes in Cross Braces (x8)
Scan the QR to watch a video for this step
A
E
A
Clamp Cross Brace so it is centered in the jig.
B
Drill two pocket holes using the outside drill guides.
C
Flip Cross Brace 180° in the jig and repeat steps A-B on the
other end of the Cross Brace.
STEP 3:
Drill Pocket-Holes in Leg Braces (x2)
Scan the QR to watch a video for this step
A
A
Clamp Leg Brace in jig so outside drill guides are
approximately 1" from outside edges of board.
B
Drill two pocket holes using the outside drill guides.
C
Flip Leg Brace 180° in the jig.
B
F
B
C
D
Align outside edge of jig to inside edge of existing pocket
holes, ensuring end stop and drill pocket hole. Repeat on the
other end of the Cross Brace.
E
Align jig so one drill guide hole is centered on Cross Brace
and drill one pocket hole.
F
Repeat steps A-E for remaining Cross Braces.
C
D
Repeat A-B on the other end of the Leg Brace.
E
Repeat A-D for second Leg Brace.
D
Advertisement
