National Instruments NI PCI-GPIB Installation Manual page 2

INSTALLATION GUIDE
Installing Your NI PCI-GPIB,
NI PCIe-GPIB, NI PXI-GPIB, or
NI PMC-GPIB and NI-488.2
for Solaris
This document describes how to install and configure your GPIB hardware and
NI-488.2 software. Refer to the section that describes the installation for your
particular board. Other documentation, including the software reference manual,
is available on your NI-488.2 software for Solaris CD in the
folder.
Before you install your GPIB controller, consult the manual that came with your
workstation for specific instructions and warnings. You must have superuser
privileges to install the hardware and software.
March 2009
372131B-01
™
\documentation