Wordpro 3 Plus - OKIDATA OKIMATE 20 Handbook

WordPro 3 Plus
IMPORTANT: Be sure to read your software manual before fo llow-
Ing any of these instructions.
First we'l l show yo u how to set up WordPro 3
Pl us t o work with OKIMATE .
NOTE : Brackets mean press that key. For example, < RETURN >
means press the RETURN key, < DEL > means press the DEL key,
< CRSR DOWN > means press the CRSR DOWN key, and < CON-
TROL > means press the CONTROL key.
1. Turn on your computer and insert the
W ordPro 3 Plu s disk.
2. Wh en
READY
appears, type:
LOAD
" *"
,8 < RETURN >
3. Wh en READY appears, type :
RUN < RETURN >
4 . Whe n menu appears, select 8027 by
typing :
8 < RETURN >
5. When
Number
of
lines?
appears,
typ e:
329 < RETURN >
32
6. When
Printer device?
appears,
type :
4 < RETURN >
7. When
Printer?
appears, sel ect ASCII
by typing :
A < RETURN >
8. When
Disk drive?
appears, type:
08 < RETURN >
9. When the status line appears, press and
release:
< CONTROL> then type: /
10. When the checkmark (Y') appears, assign
printer commands (in decimal code) to
locations 0 to 6 by typing:
0 = 29:1 = 15 :2 = 145 :3 = 17:4 = 14:5 = 146:6 = 18
11 . This enters these printer commands (deci -
mal codes are in parentheses):
0 fine print (29)
1 normal print (15)
2 Cursor Up mode (145)